Pinewood Derby Complete Car Kits 4 Hole

Home » Products » Pinewood Derby Car Kits » Winning Pinewood Derby Car Kit » Pinewood Derby Complete Car Kits 4 Hole

Pinewood Derby Complete Car Kits 4 Hole

$49.95

In stock

Fast Pinewood derby kits! BSA – compliant complete pinewood derby car. Before your purchase, please check your local rules. If you are unsure about the terminology, just email us, we will get you what you need. See what makes our kits different! 9 different reasons. All Kits are 7 inches in length. All kits are 1.75 inches in width. All kits have a minimum ground clearance of 3/8 of an inch. All kits are under 1.25 inches in height unless stated otherwise.

What makes our kits different than everyone else? Our kits come with those speed tips that everyone says to use and leaves it up to you to figure it out. Finally a kit that will compete against the derby dads! Our kits come with the speed tips and secrets that everyone charges you to buy their info. With our kit, and a little work on your end, you can dominate your race!

Leave them in the Dust with Axle and Wheel Upgrade OptionsMore INFO

In stock

Important Decision. Check your rules!

Axle Polish Level

Would you like it sealed with DuPont™ Krytox®

Super Tuner™ Axles

Type of Wheels

Steering Axle?

Run your Car on Camber Wheels?

Mold Matched Wheels

Matched Innwer Wheel Bore

Visually inspect wheels for flawless bore

Would you like your Wheel to be polished and prepped for Racing. Outer and Inner bore service

Description

Aggressive COG 4 Hole Pinewood Derby Car Kit by Derby Dust®

This design came directly from one of the published how to books that I read a few years ago.  I figured if they liked it so would you.  What they did not mention is that the Aggressive COG 4 Hole Pinewood Derby Car Kit is crazy rear weighted.  It is about 1/2″ in front of rear axle.  Consequently the only real way to race this is car is 3 wheel, rail rider.  I do not recommend this as a 4 wheel car.

Derby Dust ® uses an official BSA block then we cnc cut this profile to get you in the winner’s circle.  Most of all our fast kit includes a pre-cut car body, weight, prepared wheels, polished axles, and lube which comply to most pack’s rules.  Wheel and axle upgrades available.

This car kit will take a little bit of work to get it race ready.  However with the aggressive COG, this car will have more stored energy thus allowing it to accelerated longer than a 0.930″ COG.  Longer acceleration = faster speeds than even our “go to” models.

While every Pinewood Derby Car will have wheels and axles, do you know the tricks that will help you get maximum speed of the car?  As a result Derby Dust® tech’s take the guess work out of build a champion  When designing your car, there are several key issues to consider that includes the efficiency of all the parts put together.  Using these known tricks will result in a fast pinewood derby car that looks and performs better. Ultimately, the total speed of this car will largely depend on the builder. Alignment, lubrication and axle preparation are some of the things the builder must perform in order for this car to reach its full potential speed.

Aggressive COG 4 Hole Pinewood Derby Car Kit comes standard with:

  • Pre-cut car body in BSA axle slot, Drilled BSA Distance, or Drilled Extended Wheelbase
  • 2k diamond polished axles
  • Derby Dust® Lightly Lathed Wheels
  • Lead Canopy
  • Gap Gauge
  • #44 Drill bit
  • Small weight ballast to bring to 5 oz weight after painting
  • Strip of Foil tape to cover any exposed weight on the underside
  • Sample Tube of Derby Dust® Dry Lube
  • Written instructions with YouTube hand’s on reference.

Customers choose custom parts according to their pack rules such as:

  • Higher polished speed axles
  • Rail Riding Axles
  • Lighter weight reduced pinewood speed wheels
  • Tungsten weights
  • Wheel bore polishing
  • Pre-Painted Primed Body

Our winning car kits come with either precision cut cnc axle slots or precision drilled axle holes drilled with the Goat Boy Drill Station.  Kits with axle slots are always fully BSA compliant with all pack rules.  Especially relevant are your local pack rules.  Please check these rules before purchasing a car body with drilled axle holes.

Leave them in the Dust with Axle and Wheel Upgrade Options

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.