Pinewood Derby Body – 3D print Wing Bat Super Hero Vigilante STL FILE ONLY
New for 2022-2023 season are well thought of car body designs. We will be doing roughly a dozen body designs this year. Designed by Derby Dust techs with racing and winning in mind. Each is designed so that they can be used for rail riding with cambered wheels and skirt relief from the rail so that the body never touches the rail underneath the car if you choose to make that setup. The use of this body does not make your car fast. This particular design took 9 hours print.
Pack Rules are King
Nothing has been offered like this in the past, so we are not 100% sure of what you local pack may think. Please ask and check your rules. This car body can not be made to race without the use of YOUR pine block. It is an artistic attachment to a pinewood derby block. We suggest that you do not glue your body kit down until inspection to ensure that you can provide a race car if they deem it not acceptable.
Ready for your Cubber to finish
This is simply a body kit. The pine block must be incorporated.
This 3D printed body will be applied to YOUR wood block. Predrill your axle slots / holes. Cut your wood block to 1/4″ in width. Sand smooth and our 3d printed pinewood derby body will fit right on. That’s it for wood work. Mark your wood for some additional sanding contouring to make a custom proper fit to the body,
Car body will be within parameters of the official BSA instructions that come in the box. Some designs will run the block in reverse configuration. These will be noted.
- Wheelbase is Standard BSA wheelbase
- 7″ in length, 2.5″ in width
- Car body weighs approx. 2.08oz in weight
- Additional weight will be required to bring your car to proper racing weight
- Buyer must finish
- wood block, wheels, axles NOT INCLUDED unless otherwise stated
This design is also available in .stl file if you so wish to print your own.
Carmine DiChiara (verified owner) –
This model printed well on my Elegoo Saturn 2, used 2.5mm walls and hollowing, 15% angle or so with supports. Maybe I lucked out but it didn’t distort much when printed up at an angle. Comes in at 3 oz. for me. Thanks!