Pinewood Derby Ladder Car Body – B-Frame

Home » Products » Pinewood Derby Car Body » Ladder Style Pinewood Derby Car Bodies » Pinewood Derby Ladder Car Body – B-Frame

Pinewood Derby Ladder Car Body – B-Frame

$9.95

In stock

Pinewood Derby Ladder Car Body – Plank is latest design from Derby Dust.   All laser cut bodies are designed for the ultimate performance utilizing minimal wood weigh, low profile, adjustable COG designs.  The body designs, weight pockets, center of mass, and aerodynamics are all optimized for top performance. This body has been specially designed for our 1/4″ tungsten cubes.

  • Options for this Car include:

    • Wheelbase: BSA Slots, Drilled BSA Distance, Extended Wide Wheelbase (variations in design will be appropriate for each type of wheel base)
    • Unweighted or weighted body
    • Finishing Kit available (Foil Tape, #44 Drill bit, 7 grams of Tungsten Putty)
    • No wheels or axles come with this body
    • Available in Kit Form

As you can see there are a bunch of options. Please do not get overwhelmed. Simply scroll down past the options

 

In stock

Wheelbase

Choose Wheelbase

*Blank / Custom Option

If Blank / Custom Option is selected, please tell us what wheel base that you need. We have to send you the correct distance. We can custom make them as desired but there will be a 1 day production delay. Please provide 2 measurements. Distance for rear axles in relation from rear of block. Then distance between the axles. For Standard BSA distance, write Std BSA, for extended wheel base, write ext wheel base, for all others please fill in blanks.

Weighted Body

Would you like your Body Weighted

Finish Kit

Add Finishing Kit. Foil Tape, #44 Drill bit, 7 grams of Tungsten Putty

Rear Axle Camber

Would you like your rear axles drilled at 3 degrees?

Veneer Top

Would you like a full length veneer top?

SKU: ladder-xl-1-2 Category:

Description

Pinewood Derby Ladder Car Body – B-Frame

Pinewood Derby Ladder Car Body – B-Frame is lightest weight body that we offer.  Only 8 Grams!!!!  Low profile design utilizing 1/4″ tungsten cubes or tungsten block ballasts.  Take great notice your track has to be very smooth and have a very gentle stopping section.  If it doesn’t, good chance this car might not make it to the finals.   Lots of push.  Lots of options.  You will still need at least 117 grams of weight to bring the car to proper weight even more with weight reduced wheels. Take note, there is no messing around with this body. Know what you are doing, use sharp bits, drill and build slow. If an axle is tight, run the provided bit through it again.   Rail Rider Setup.  Smooth Track only.   Pinewood Derby Ladder Car Body – B-Frame does not come with wheels or axles.

Due to its thickness, we highly suggest using a bent axle instead of trying to drill a high wheel.

Pinewood Derby Ladder Car Body – B-Frame is designed with minimum wood weight in mind.  We use simple, proven designs that will get you in the winner’s circle.  Since we remove a lot of the strength structure of the wood block, handle these bodies with care.  NO HAMMERING ever.  Because of this a #44 drill bit provided with each body to ensure easy proper axle install.

CNC laser cut an official BSA block, know Pinewood Derby Ladder Car Body – B-Frame is always compliant with national rules when BSA slots are chosen.  The rules of local events sometimes differ from those of BSA box rules.  If you are unsure about the terminology, just email us, we will get you what you need.

How to properly add weight to Pinewood Derby Ladder Car Body – B-Frame

Take note, Pinewood Derby Ladder Car Body – B-Frame is not at weight.  Please properly plan for this.  Comes in around 8 grams so you will need about 117 grams of additional weight.  We offer tungsten kits and various lead toppers to customize to your liking .  Design is based on the 7 principles of having a fast pinewood derby car.  This body covers the low profile, lightweight, aerodynamic design.  COG is infinitely adjustable.

Options for this Pinewood Derby Ladder Car Body – B-Frame include:

  • Wheelbase: BSA Slots, Drilled BSA Distance, Extended / Wide Wheelbase
  • Unweighted or weighted body
  • Finishing Kit available (Foil Tape, #44 Drill bit, 7 grams of Tungsten Putty)
  • No wheels or axles come with this body
  • Available in Kit Form

Additional information

Weight 5 oz

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Laser is Here! Ladder Frames, balsa fenders coming soon.

New Taig Ballscrew Closed Loop CNC lathe with collect chucks. Should be a great year! Dismiss