Weight Pockets Pinewood Car
Weight Pockets Pinewood Car
Weight Pockets Pinewood Car
Weight Pockets Pinewood Car

EZ Pinewood Derby Car Body – Slim Wedge

$16.95

This Easy EZ tune pinewood derby car is for the novice for first time builder that does not want to have to spend any time tuning their pinewood derby car.  The EZ car achieves maximum speeds by using center rail riding with pre-drilled camber axles holes instead of using bent axles for tuning.  Derby Dust® techs use the Goat Boy Drill Station to drill at the proper angles to have a champion rail runner car with no bent axles!  All you have to do is finish the body and push in the straight axles!  It is that simple.

Customize according to your Pack Rules

Easy EZ tune Pinewood Derby Car :

    • Pre drilled for a rail runner with NO TUNING!!!
    • Wheel base options:  Axle Slots, Drilled Axle Holes at BSA slot distance, Extended wheelbase
    • Fast aerodynamic body designs for top speeds
    • Tungsten or Lead weights based on your budget
    • Complete and easy instructions for building a champion car.  YouTube and written instructions.

EZ Tune YouTube Video for CAR KIT

 

ADDITIONAL INFORMATION

Is this kit as fast as a hand-tuned car?   NO it is not as fast as a hand-tuned car.  A hand-tuned car is adjusted to the proper point to where the car barely crosses center at a given point.  A pre-drilled car needs to be certain that it will ride the center strip.  As a result the car is slightly over-steered which will reduce the maximum speed that it could attain.

*Please note, the Pitstop Drill Guide and the push rod shown in video has been discontinued.  The EZ Kit will no longer come with these tools.

In stock

Weighted

Weighted body

SKU: EZ Slim Wedge Category:

Pinewood Derby Center Rail Rider Wedge Tuned Car

We take the guess work out for you with our Pinewood Derby Center Rail Rider Wedge Tuned Car EZ Tune.  These are fast cars, time after time.  They are built for one thing in mind, speed.  Most of all we will keep it simple as we can. Slim Wedge is a tried and true winner.  The design is a go to to all pro cars.   Round every flat surface for the best possible air flow to decrease drag.

Derby Dust® EZ Tune cars are a great choice for those that can not get the hang of adjusting tuning a car to get the fastest possible speeds.  Most noteworthy is we eliminate the need to know how to adjust the axles due to pre-drilling axle holes at given degrees of angles.  In conclusion all the builder must do is push straight axles in the drilled holes, and properly gap them.  Glue in place, and do a proper graphite break-in.

How to Apply Pinewood Derby Graphite Break In Derby Dust® Dry Lube Application –Derby Dust 

Is this kit as fast as a hand-tuned car?   NO it is not as fast as a hand-tuned car.  A hand-tuned car is adjusted to the proper point to where the car barely crosses center at a given point.  A pre-drilled car needs to be certain that it will ride the center strip.  As a result the car is slightly over-steered which will reduce the maximum speed that it could attain.

 

Derby Dust EZ Pinewood Derby Car Kit How To Video

*Please note, the Pitstop Drill Guide and the push rod shown in video has been discontinued.  The EZ Kit will no longer come with these tools.

 

Options include:

  • 3 Wheel Racing ONLY.
  • Wheelbase:   BSA Slots, Drilled BSA Distance, Extended Wheelbase
  • Unweighted / Weighted to 120-125 grams
  • Tungsten Putty provided for final weight at weigh in (weighted bodies only)
  • Axles pre-drilled for straight axle install using the Goat Boy Drill Station.  Rear axles drill at 3 degrees negative camber.  Front right will be drill for steering left.  Left will be high wheel.
  • #44 Drill bit

Additional Products Needed:

  • Primer and Paint of Choice

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Pinewood Derby Center Rail Rider Tuned Car BodyEZ Pinewood Derby Car Body - Physic's Lecture
Quick View

EZ Tune Pinewood Derby Car Body

EZ Pinewood Derby Car Body – Physics Lecture

$16.95
[widget id="block_widget-4"]

Copyright © 2012-2021 Machine Envy, LLC.  All Rights Reserved.  Derby Dust® is a registered trademark of Machine Envy, LLC.

Machine Envy, LLC is neither affiliated with nor endorsed by the Boy Scouts of America. Pinewood Derby® is a registered trademark of Boy Scouts of America.

Derby Worx® is a registered trade mark of Derby Worx, Inc. Rail Rider™ is a registered trademark of Derby Worx, Inc.

Awana® is a Registered Trademark of Awana Clubs International. Machine Envy, LLC is neither affiliated with nor endorsed by the Awana Clubs International.